Is a SABER Certificate Required for LED Lights?
Yes. LED lamps, tubes, luminaires, floodlights, street lighting and most other lighting products fall under Saudi Technical Regulations and are treated as regulated products on the SABER platform. This means a Product Certificate of Conformity (PCoC) is required before individual shipments can obtain a Shipment Certificate of Conformity (SCoC) and clear Saudi customs.
Lighting products are subject to two separate requirements that must both be satisfied: an electrical safety requirement and an energy-efficiency requirement. A product that passes safety testing but does not meet the applicable energy-efficiency and labelling rules will still be rejected.
Applicable Technical Regulations
Lighting products for Saudi Arabia are certified through SABER registration and are generally assessed against the following regulatory frameworks. The exact regulation, edition and scope that apply to your product are confirmed at the assessment stage based on the product type and HS code.
- Technical Regulation for Low-Voltage Electrical Equipment and Appliances — covers electrical safety of lighting products operating within low-voltage ranges
- Energy-efficiency and labelling requirements for lighting products (SASO energy-efficiency regulations) — covers luminous efficacy, power factor and the mandatory energy-efficiency label
- Electromagnetic Compatibility (EMC) requirements — applicable to electronic drivers and control gear
- Applicable IEC safety standards — for example IEC 60598 (luminaires), IEC 62560 (self-ballasted LED lamps) and IEC 61347 (lamp control gear / drivers)
Testing Requirements
Before a PCoC can be issued for lighting products, test reports demonstrating conformity to the applicable standards are normally required. Typical testing includes:
- Electrical safety testing (IEC 60598 / IEC 62560 series depending on product type)
- Photometric and performance testing — luminous flux, luminous efficacy (lm/W) and power factor for energy-efficiency classification
- EMC testing for products containing electronic drivers
- Photobiological safety assessment where applicable
Existing IECEE CB scheme reports or CE test reports may be accepted if they cover the correct model and standards and are within validity. We assess your existing reports before arranging any new product testing to avoid duplicate cost.
SABER Certificate Requirements for LED Lights
The typical document set for a lighting-product SABER application is below; our full documents required guide explains each item in more detail.
- Commercial invoice and packing list
- Product photographs showing model markings and ratings
- Technical datasheet or specification sheet
- HS code
- Test reports (safety, performance / energy efficiency, EMC)
- Energy-efficiency label artwork
- Manufacturer details and, where relevant, a Declaration of Conformity
- Saudi importer registration details
How We Help
- Assess your product and confirm applicable regulations
We classify the lighting product, confirm the HS code and identify every regulation that applies — safety, energy efficiency and EMC.
- Review existing test reports
We check whether your CE or IECEE reports can be reused, and identify only the gaps that require new testing.
- Coordinate testing and the energy-efficiency label
We arrange any required testing with an accepted laboratory and confirm the energy-label format and placement.
- Obtain the PCoC and process each SCoC
We coordinate the Product Certificate of Conformity with the certification body and process the Shipment Certificate for each consignment.
Frequently Asked Questions
Do LED lights really need an energy-efficiency label for Saudi Arabia?
In most cases, yes. Lighting products are covered by Saudi energy-efficiency requirements, which include a mandatory energy label showing efficiency data in a specified format. The exact requirement depends on the product type. Missing or incorrect energy labels are one of the most common reasons lighting shipments are held or rejected.
Can I use my CE certificate for LED lights in Saudi Arabia?
A CE certificate itself is not accepted as Saudi conformity, but the underlying test reports may be reusable if they cover the correct model and applicable standards and are within validity. Energy-efficiency and labelling requirements are specific to Saudi Arabia and are assessed separately from CE marking.
What is the difference between the product certificate and the shipment certificate?
The PCoC (Product Certificate of Conformity) confirms the product model meets the applicable regulations and is typically valid for one year. The SCoC (Shipment Certificate of Conformity) is issued per consignment and is required for each individual shipment. Both are needed to clear customs.
How much does SABER certification for LED lights cost and how long does it take?
It depends mainly on whether acceptable test reports already exist. When valid safety, EMC and energy-efficiency reports are available, a lighting PCoC can typically be arranged within a few working days; if new testing or an energy-label assessment is needed, the laboratory turnaround is the main variable. Send your model details and reports and we will give you a specific quote and timeline at no cost. See our SABER certificate cost guide.
Which lighting products and HS codes does this cover?
The same SABER route applies across LED lamps and tubes, luminaires, floodlights, panel lights, street and industrial lighting and their control gear — generally classified under HS headings such as 8539 (lamps) and 9405 (luminaires and fittings). The precise HS code affects registration and the energy-efficiency scope, so we confirm the correct classification for your product during assessment.
Do different wattages and models each need a separate certificate?
Not necessarily. A single PCoC can often cover a family of related models or a wattage range from the same manufacturer, provided the construction and applicable standards are the same. We structure the certificate scope so all the variants you actually export are covered without unnecessary duplication.